The new M12 is a modern front end to any system. All digital inputs types are supported as well as balanced and unbalanced analog inputs, all with precise analog gain control, seamlessly integrated into one product, your source controller.

The M12 builds upon the proven design of the M1 SE D/A converter so your digital sources are handled and converted in the best way. To that we add to it a pure dual mono analog signal path with high resolution analog gain and level control, controlling the output stage of the D/A converter in the analog domain with no loss of resolution and pass thru analog inputs for your analog sources. Like the M1, the M12 is a dual mono design with 3 power supplies and separate left and right analog power supplies and digital and analog processing.

  • Digital Inputs: XLR: AES/EBU 24 bit Single Wire, BNC: SPDIF, RCA: SPDIF, Optical: Toslink 44.1- 96k, USB 2
  • Sample Rates: AES, SPDIF, AUX in44.1 kHz, to, 192khz
  • Sample Rates USB: 44.1 kHz, to, 384kHz, DSD 64fs 128Fs 256Fs Native
  • Sample Rates Ethernet: 44.1 kHz to 384kHz, DSD 128 Native
  • Jitter: 8 psec @ 48k / 6psec @ 96k
  • Balanced Analog Outputs: XLR balanced (pin 2 hot)
  • Impedance: 40 ohm
  • Output: @ full scale +16.5 dbm (5.2V RMS)
  • Output Level: 90db in 1 db steps
  • D/A Conversion: PCM 24 bit delta sigma 8x oversampling, DSD direct 1 bit
  • Frequency Response: @44.1k10 hz- 20 kHz +0dB, -.2 dB
  • Dynamic Range: >120dB A-Weighted
  • THD+N:  @ 1k.0008% @ 0dbfs / .0004% @-30dbfs
  • Unbalanced Analog Outputs: RCA
  • Output level: Full scale at front panel +6 dbm (1.2V RMS)
  • D/A Conversion: 24 bit delta sigma 8x oversampling
  • EMC: Complies with: EN 55103-1, EN 55103-2, FCC part 15 and Class BRoHS
  • Complies with: EU RoHS Directive 2002/95/EC
  • SafetyCertified to: IEC 60065, EN 55103-2
  • Operating Temperature: 32 F to 105 F (0 C to 40 C)
  • Storage Temperature: -22 f to 167 F (-30 C to 70 C)
  • Finish: Anodized Aluminum
  • Dimensions: 17” x 12“ x 4.5”
  • Weight: 15 lbs
  • Shipping Weight: 18 lbs
  • Shipping Dimensions: 22”x 17”x 7”
  • Mains Voltage: -100, 120, 220, 240 VAC, 50 Hz – 60 Hz factory set
  • Trigger out: TRS mini jack, Tip ground, Sleeve 5VPower consumption:28 Watts (6W standby)
  • Warranty parts and labor: 2 yrs non-transferable.