McIntosh MAC7200 Stereo Receiver in excellent physical and functional condition with original box, packing and accessories. Unit sells as new for $8,000.00

ELECTRONIC SPECIFICATIONS

• Power Output per Channel200 Watts

• Number of Channels2

• Speaker Impedance2, 4, or 8 Ohms

• Rated Power Band20Hz to 20kHz

• Total Harmonic Distortion0.005%

• Dynamic Headroom2dB

• Frequency Response +0,-0.5dB20Hz to 20kHz

• Frequency Response, +0, -3dB10Hz to 100kHz

• Sensitivity Phono (Moving Coil)0.25mV

• Sensitivity Phono (Moving Magnet)2.5mV

• Sensitivity High Level (Balanced / Unbalanced)0.5V/0.25V

• Sensitivity (Power Amp input)1.4V

• Signal To Noise Ratio (Moving Coil)80dB

• Signal To Noise Ratio (Moving Magnet)82dB

• Signal To Noise Ratio (High Level)95dB

• Signal To Noise Ratio (Power Amp input)113dB

• Input Impedance (Balanced / Unbalanced)20K/20K

• Damping Factor>40

• Maximum Output (Balanced / Unbalanced)8V Unbalanced

CONNECTIVITY

• Balanced Input1

• Unbalanced Input5

• Phono Input Moving Coil1 (adjustable loading)

• Phono Input Moving Magnet1 (fixed loading)

• Upgradeable Digital Audio ModuleYes: DA1

• Digital Coaxial Input2

• Digital Optical Input2

• Digital MCT Input1

• Digital USB Input1

• Balanced Variable Output0

• Unbalanced Fixed Output0

• Unbalanced Variable Output2

• Headphone Output1/4" High Drive with Headphone Crossfeed Director (HXD®)

• AM/FM Tuner optionIncluded

• Home Theater PassThruYes

• Unbalanced Analog Connector TypeStandard

• Speaker Binding Post TypeStandard

• Service Port1

DIGITAL AUDIO SPECIFICATIONS

• Digital-to-Analog Converter (DAC) Type8-channel, 32-bit/384kHz PCM/DSD, Quad Balanced

• Digital Coaxial Input Sample Rate24-bit/44.1kHz to 192kHz

• Digital Optical Input Sample Rate24-bit/44.1kHz to 192kHz

• Digital MCT Input Sample Rate16-bit/44.1kHz (CD)
  DSD64 (SACD)

• Digital USB Input Sample Rate32-bit/44.1kHz to 384kHz (PCM)
  DSD64, DSD128, DSD256, DXD352.8kHz, DXD384kHz

FM SPECIFICATIONS

• Tuning Range87.9MHz - 107.9MHz (USA)
  87.5MHz - 108.0MHz (Europe)
  76MHz - 90MHz (Japan)

• Channel Spacing200kHz (USA)
  50kHz (Europe50)
  100kHz (Europe100, Japan)

• Antenna Input75 ohms, Type “F” Coax connector

FM ANALOG SPECIFICATIONS

• Useable Sensitivity2.2uV (18.1dBf)

• 50dB Quieting Sensitivity1.5uV (14.8dBf)

• Signal To Noise RatioMono: 70dB
  Stereo: 68dB

• Frequency Response±1dB 20Hz to 15,000Hz

• Total Harmonic DistortionMono: 0.4%
  Stereo: 0.8%

• Channel Selectivity60dB Adjacent Channel
  66dB Alternate Channel

• Stereo Separation38dB

AM SPECIFICATIONS

• Tuning Range530kHz - 1720kHz (USA)
  522kHz - 1602kHz (Europe)
  522kHz - 1611kHz (Japan)

• Channel Spacing10kHz (USA)
  9kHz (Europe, Japan)

• Antenna InputBalanced, RJ45 connector (for use only with supplied McIntosh RAA2 Remote AM Antenna)

AM ANALOG SPECIFICATIONS

• Selectivity45dB Adjacent Channel

• Signal To Noise Ratio50dB

• Frequency Response0dB, -6dB 50Hz to 3,000Hz

• Total Harmonic Distortion0.5%

• Sensitivity350uV/m

CONTROL

• Tone ControlsBass and Treble

• Tone Bypass and Input AssignYes

• RS232 Control InputYes

• Power Control Output1 Main, 2 Trigger

• Rear Panel Data Port4

• Rear Panel IR Sensor InputYes

• Input Level MatchYes

GENERAL SPECIFICATIONS

• Vacuum Tube or Solid StateSolid State

• Output TypeAutoformer™

• Output MetersYes

• Dual Layer ChassisYes

• Chassis FinishBlack painted steel

• McIntosh Monogrammed Heatsinks™Yes

• Power Requirement120V 50/60Hz, 4.4 amps

• Standby Power Requirement<0.25 Watts

WEIGHTS & DIMENSIONS

• Unit Dimensions (W x H x D)17-1/2" (44.5cm) x 7-5/8" (19.4cm) x 18-3/4" (47.6cm)

• Unit Weight75 lbs (34.1 kg)

• Shipping Weight93 lbs (42.3 kg)

Original Accessories:

• Box, Packing, Manual, Accessories